This expansion, compatible with both American and Japanese Model1's and the Video Genie I, II, EG 3003 and EG 3008 produces a 184 * 192 monochrome screen. When installed, it displays on the original TRS-80 screen. All timing is derived from the TRS-80. The Video memory, 12 KByte Static RAM, is controlled via six I/O ports, 0 to 5.
Port 0 disables the HRG1, port 1 enables it. Port 4 reads six bits from the HRG1 memory, port 5 writes six bits to the HRG1. Port 2 and 3 are used to program addressing:
| port 2 | port 3 | bit: 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 | 64 char. hor. | 16 reg. vert. | 12 pnts. vert.| |
The extension to Basic BASGR gives eight extra commands:
The Basic extension BASGR was written for NEWDOS80 V2.0, and loaded from 5200H. It then positions itself in hi memory.
The hardware (300 dpi b/w scans):
The board layout a bit smaller:
The HRG1 is connected to the TRS-80 with two flatcables: a 16 wire and a 24 wire cable. The HRG1 output is OR-ed with the original video signal.
This interface is supported by both the xtrs and WinTRS-80 emulation packages.